Technical Specifications - Bestway Hydro-Force 65346 Bedienungsanleitung

EN
Warning
IMPORTANT SAFETY INSTRUCTIONS
Read the manual and follow the instructions relating to safety tips, correct and complete product assembly, setting into service, use and
maintenance. For your own safety, always heed the advice and warnings in these instructions. Non-compliance with these operating instructions
may expose you to serious danger or death. Only use the product in the places and conditions for which it is intended.
Stand-up Paddling is a dangerous sport. Use of this product exposes the user to unexpected risks, dangers and hazards.
User should realize and understand these risks. The use of this product implies the respect of the safety instructions described in the manual.
Do not exceed the maximum recommended number of persons.
Regardless of the number of persons on board, the total weight of persons and equipment must never exceed the maximum recommended load.
Do not use this product if you are under the influence of alcohol, drugs or medications.
Life saving devices such as life jackets and buoys should be pre-inspected and used at all times. Always paddle with an experienced partner when
using this product.
Tell your sail routes and time schedule to your partner.
Check the weather forecast first to know the marine environment and weather conditions before starting. Bad weather and marine environment is
very dangerous. Never use this product in conditions that are beyond your ability (such as, but not limited to, high surf, riptides, currents or river
rapids)
Use the product near the shore and beware of natural factors such as wind, tidewaters and tidal waves. BE AWARE OF OFFSHORE WINDS AND
CURRENTS.
Before every use, carefully inspect the product for signs of wear or leakage to ensure everything is in good condition. Please do not use the SUP if
you find any damage. Do not surf in unfamiliar water areas.
Beware of potential harmful effects of liquids such as battery acid, oil and petrol. These liquids may damage the product. Inflate according to the
rated pressure on the product or it will cause over inflation and/or an explosion.
Stay balanced. Uneven distribution of loads on the board may cause the board to overturn which could lead to drowning.
Know how to operate this product. Check your local area for information and/or training as needed.
Inform yourself about local regulations and dangers related to surfing, boating and/or other water activities.
SAVE THESE INSTRUCTIONS

Technical Specifications

Item Inflated Size
3.05m x 84cm x 15cm
65346
(10' x 33" x 6")
Part No. Description
001
002 High Pressure Hand Pump
003
004
005
006 Polyester 3-ply patch
007
008
009
Installation of the SUP
1. Take out the SUP from the bag (Fig 1).
2. Unfold the SUP (Fig 2).
3. Connect the inflation hose to the inflation valve (Fig 3).
4. Inflate the SUP to 1.03 bar (15 psi) (Fig 4).
5. Close the valve before use (Fig 5).
1.
Recommended
Working pressure
1.03bar (15psi)
1.03 bar
15psi
QTY
Surf Board 1
1
Oar 1
Safety Rope 1
Wrench 1
1
Bag 1
Elastic Cord 1
Fin 1
2.
Maximum Load Maximum Number
Capacity of persons
130kg (287lbs) 1 Adult
130kg
1
65346
P05273
P05297
P05291
/
/
/
/
/
/
6. Install the safety rope (Fig 6 & 7).
7. Install the fin (Fig 8).
8. Assemble the oar (Fig 9).
9. Completion (Fig 10).
3.
2
SPARE PART
001 002
0
005 006
4. 5.
WE SUGGEST NOT TO RETURN
THE PRODUCT TO THE STORE
QUESTIONS? PROBLEMS?
MISSING PARTS?
For FAQ, Manuals, Videos Or
Spare Parts, Please Visit
bestwaycorp.com/support
003 004
007 008 009