Herunterladen Diese Seite drucken

Bestway HYDRIUM SPLASHER 56668 Benutzerhandbuch Seite 10

Stahlwandpools

Werbung

Verfügbare Sprachen

Verfügbare Sprachen

Proper maintenance can maximize the life of
your pool.
During the season of use of the swimming pool, the filtration system
must be necessarily put into service every day, enough time to assure
at least a complete renewal of the volume of water.
NOTE: The pump is used to circulate the water and to filter small
particles. In order to keep your pool water clean and hygienic, you
must also add chemicals.
Repair
In the event of a leak, patch your pool using the underwater adhesive
repair patch provided. You can find the instructions in FAQs on the
support section of our website, www.bestwaycorp.com.
WINTERIZATION
If you do not want to dismantle the pool in winter, please observe the
following instructions:
IMPORTANT: Do not drain all of the pool water. If you do so, the pool
may be damaged by strong wind. Drain the water to 10cm below the
inlet valve on the pool wall.
1. Drain the water to 10cm below the inlet valve on the pool wall. You
can use a pump or a garden hose (Diagrams 19, 20).
2. Treat the pool water with a suitable chemical product.
3. Remove the filtration system from the pool.
You can leave the inlets/outlets attached to the pool.
4. Also remove any other pool accessories and store them in a dry and
cool place.
5. Protect the pool with the pool cover.
If you want to dismantle the pool in winter, please observe the
following instructions:
1. Drain the pool with a garden hose, or use a drain pump to empty the
pool (Diagram 19).
2. Clean all pool parts with a sponge and soap with a neutral pH. Dry
them and tidy them away in a dry and clean place.
19
20
10 cm
RE- ASSEMBLY
Carefully inspect your pool to ensure that there are no missing or
damaged parts.
1. Follow steps 1 through 8 for assembling the rail and steel wall.
2. Align the holes on both the steel wall and the liner.
3. Assemble the control valve and strainer.
#04
#08
4. Follow steps 9 through 13 and fill the pool with water.
NOTE: If you discover the liner is damaged, please contact our After
Sales Service or purchase a new liner.
10

Werbung

loading

Diese Anleitung auch für:

Hydrium splasher 56669