Inhaltsverzeichnis
Werbung
ADJUSTABLE SOLDERING STATION
The numbers in the text refer to the diagrams
on page 2.
WARNING
Read the enclosed safety warnings,
the additional safety warnings and the
instructions. Failure to follow the safety
warnings and the instructions may result
in electric shock, fire and/or serious
injury. Keep the safety warnings and
the instructions for future reference.
Introduction
This appliance is designed for domestic use.
This soldering station is suitable for soldering on
printed circuit boards, soldering of plastic and
for burning work on wood and leather. All other
applications are specifically excluded.
1. MACHINE INFORMATION
Technical specifications
Voltage
Frequency
Power consumption: soldering station
Type of protection
Weight
Product information
Fig. A
1. Tip
2. Fixing nut
3. Soldering iron
4. On/Off switch
5. Holder
6. Soldering station
7. Temperature adjustment knob
8. Sponge
9. Accessory drawer
2. SAFETY INSTRUCTIONS
Explanation of the symbols
In accordance with essential applicable
safety standards of European directives
Denotes risk of personal injury, loss of life
or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
Immediately unplug the plug from the
mains electricity in the case that the cord
gets damaged and during maintenance
Specific safety instructions
Safe handling of the machine is only
possible when you read the safety and
operating instructions thoroughly and
rigorously follow the instructions which
are included inside.
Warning: The soldering iron must be
placed in its holder when not in use
• For all work on the soldering station, pull the
plug out of the socket.
• The power supply lead and the plug must be
in perfect condition. Always keep the power
220-240 V~
supply lead away from the area of work.
50 Hz
• The voltage of the electric power source must
48 W
tally with the instructions on the type plate of
I
the appliance.
0.6 kg
• Always fasten the nut tightly when attaching
the tip. This ensures a good electric
connection.
• Ventilate the place of work sufficiently in order
to take unwanted vapours quickly away from
melting material.
• The mains power supply lead for the soldering
gun may only be replaced by a specialist
electrician.
• Use only original accessories which
are supplied or recommended by the
manufacturer.
• Do not immerse the unit in liquids of any kind.
• Do not use the unit to heat plastic or liquids.
• Never use the device on live electronic circuits.
Make sure power to the work piece is cut and
capacitors are discharged.
• Incorrect use may cause fire.
• Do not touch the shafts, tips, or hot air gun as
this can cause serious burns. Keep the tips
and hot air away from the body, clothes, or
other flammable material.
3
Werbung
Inhaltsverzeichnis
