Safety Instructions; Machine Information - Ferm SGM1001 Originalbetriebsanleitung

ElEcTric sOldEring sET
The numbers in the text refer to the diagrams
on page 2.
For your own safety and that of others,
we recommend that you read this
instruction manual carefully before
using this saw. Keep this instruction
manual and the documentation
provided with the saw for future
reference.
introduction
This appliance is designed for domestic use. This
soldering gun is suitable for soldering on printed
circuit boards, soldering of plastic and for burning
work on wood and leather. All other applications
are specifically excluded.
contents

1. Machine information

2. Safety instructions

3. Operating
4. Working indications
5. Service & maintenance
1. Machine information
Technical specifications
Voltage
Frequency
Power consumption: soldering gun
Power consumption: soldering iron
Intermittent service
Type of protection
Weight
contents of packing
1 Soldering gun with tip
1 Soldering iron
1 Soldering help with magnifying glass
1 Solder suction tool
1 Stand for soldering iron
1 Roll of solder
1 Soldering paste
1 Terminal pin
1 Spare tip
1 Operating instructions
Check all parts for shipping damage. Should you
detect any damage, or should any parts be
missing, please notify the dealer from whom the
machine was bought.
Ferm
Product information
Fig. A
1. Tip
2. Fixing screw
3. Status indicator
4. Switch
5. Handle
6. Power supply lead.
2. Safety instructions
Explanation of the symbols
Class II machine – Double insulation –
You don't need any earthed plug.
Denotes risk of personal injury, loss of
life or damage to the tool in case of non-
observance of the instructions in this
manual.
Indicates electrical shock hazard.
230 V~ Immediately unplug the plug from the
50 Hz
mains electricity in the case that the
100 W
cord gets damaged and during
30 W
maintenance
12 s / 48 s
II
Specific safety instructions
0.6 kg
Safe handling of the machine is only
possible when you read the safety and
operating instructions thoroughly and
rigorously follow the instructions which
are included inside.
• For all work on the soldering gun, pull the plug
out of the socket.
• The power supply lead and the plug must be in
perfect condition. Always keep the power
supply lead away from the area of work.
• Do not drill into housing of the machine, as
otherwise the double insulation will be broken
(use adhesive shields).
• The voltage of the electric power source must
tally with the instructions on the type plate of
In accordance with essential
applicable safety standards of
European directives
EN
3