Herunterladen Inhalt Inhalt Diese Seite drucken

Items Included In The Package; Explanation Of Symbols; Warnings And Safety Notes - Beurer MG 80 Gebrauchsanweisung

Infrarot-massagegerät
Vorschau ausblenden Andere Handbücher für MG 80:
Inhaltsverzeichnis

Werbung

Verfügbare Sprachen
  • DE

Verfügbare Sprachen

  • DEUTSCH, seite 1

1. Items included in the package

Check that the device packaging has not been tampered with and make sure that all contents are present. Before
use, ensure that there is no visible damage to the device or accessories and that all packaging material has been
removed. If you have any doubts, do not use the device and contact your retailer or the specified Customer
Services address.
1 x Infrared Massager
2 x Interchangeable massage attachments
1 x These operating instructions

2. Explanation of symbols

The following symbols are used in the operating instructions and on the type plate:
WARNING
Warning instruction indicating a risk of injury or damage to health.
IMPORTANT
Safety note regarding potential for damage to the device/accessories
Note
Note on important information.
Read the instructions for use
21
Dispose of packaging in an environmentally friendly manner
PAP
Please dispose of the device in accordance with EC Directive – WEEE (Waste Electrical and
Electronic Equipment).
Manufacturer
CE labelling
This product satisfies the requirements of the applicable European and national directives.
The products demonstrably meet the requirements of the Technical Regulations of the EAEU.
The device has double protective insulation and therefore complies with protection class 2.

3. Warnings and safety notes

Keep for later use and make available for other users.
• The device and in particular the mains cable should be checked for any damage before each use.
• Never plug the device into the mains power supply if the cable is damaged. Contact your electrical dealer
or customer service.
• Repairs must be carried out only by customer service or authorised dealers.
• Never hold or carry the device by the mains cable.
• If a fault should occur during use, switch off the device immediately and unplug it from the socket.
WARNING
• Connect the device only to the voltage stated on the type nameplate
• Unplug the mains cable immediately after use.
8

Werbung

Inhaltsverzeichnis
loading

Inhaltsverzeichnis