Machinery Directive - Siemens CP 1623 Betriebsanleitung

All manuals and user guides at all-guides.com
Approvals, Certificates
Declaration of conformity
The EC Declaration of Conformity is available for the responsible authorities according to the
above-mentioned EC Directive at the following address:
Siemens Aktiengesellschaft
Industry Sector
Industrial Communication (A&D SC IC)
Postfach 4848
D-90327 Nürnberg, Germany

Machinery directive

The products are not machines in the sense of the EC Machinery Directive. There is
therefore no declaration of conformity relating to the EC Machinery Directive 2006/42/EEC
for these products.
If the products are part of the equipment of a machine, they must be included in the
declaration of conformity procedure by the manufacturer of the machine.
Notice for Australia (C-TICK)
The product CP 1623 meets the requirements of the AS/NZS 3548 standard.
ICES conformity
The digital class B product CP 1623 fulfills the requirements of Canadian standard ICES-
003.
CSA approval
The SIMATIC NET product CP 1623 is approved in accordance with standard CAN/CSA C
22.2 no. 60950-1.
Notice for USA (FCC)
You will find this information in the English part of the document.
UL approval
The SIMATIC NET product CP 1623 is approved in accordance with standard UL 60950-1,
First Edition.
14
CP 1623
Operating Instructions (Compact), 02, A5E01175608