Analog Input Characteristics (Ri8-D Only); Analog Output Characteristics (Ro8-D Only); Digital I/O Characteristics - Yamaha Ri8-D Bedienungsanleitung

Specifications

Analog Input Characteristics (Ri8-D only)

Input
Terminals
INPUT 1-8
*1. XLR-3-31 type connectors are balanced.(1=GND, 2=HOT, 3=COLD)
* In these specifications, 0dBu = 0.775 Vrms.
* All input AD converters are 24bit linear, 128times oversampling.
* +48V DC ( phantom power ) is supplied to INPUT XLR type connectors via each individual software controlled switch.

Analog Output Characteristics (Ro8-D only)

Output Actual Source
Terminals
OUTPUT 1-8
*1. There are switches inside the body to preset the maximum output level.
*2. XLR-3-32 type connectors are balanced. ( 1=GND, 2=HOT, 3=COLD )
* All output DA converters are 24bit, 128times oversampling.

Digital I/O Characteristics

Terminals
Primary/Secondary
154
Actual Load
GAIN
Impedance
+66dB
7.5kΩ
–6dB
For Use With
Impedance Nominal
75Ω 600Ω Lines
Format Data length
Dante 24bit or 32bit
Owner's Manual
For Use With
Nominal
Nominal
–62dBu (0.616mV)
50-600Ω Mics &
600Ω Lines
+10dBu (2.45V)
Max.Output Level
*1
Select SW
Nominal
+24dB (default) +4dBu (1.23 V)
+18dB –2dBu (616mV)
Level
8ch (Ri8-D to other device)
1000Base-T
8ch (Other device to Ro8-D)
Input Level
Max. before clip
–42dBu (6.16mV)
XLR-3-31 type
(Balanced)
+30dBu (24.5V)
Output Level
Max. before clip
+24dBu (12.3V)
XLR-3-32 type
(Balanced)
+18dBu (6.16V)
Audio
Connector
*1
Connector
*2
Connector
RJ45