Setting The Functions - be cool BCP5AC2101F Bedienungsanleitung

HOW TO CORRECTLY USE THE REMOTE CONTROL
Point the remote directly at the front of the appliance and make sure there are no obstacles
between the remote control and the appliance.
Do not expose the remote control to direct sunlight and keep it away from heat
DESCRIPTION OF REMOTE CONTROL
ON/OFF
SPEED +
SPEED -
The control panel of the appliance has the same buttons as on the remote
control, so all functions can be set directly on the appliance as well as by using
the remote control.
SWITCHING ON THE APPLIANCE

Press the ON/OFF key to switch on the machine.

As soon as you switch on the unit, it will run at "Low Speed".

If you want to put the machine in standby mode - press the ON/OFF button again.
Never switch off the air cooler by pulling the plug directly from the mains.
Always press the ON/OFF button to switch it off, and wait a few minutes before
disconnecting the appliance from the mains. This allows the appliance to go through
SETTING THE SPEED

Use the SPEED-button to set and adjust the speed of the blower.

The respective indication lights up on the display:
1 x press  Medium speed 
2 x press  High speed 
3 x press  Low speed 
NOTE
Please handle the remote control carefully.
sources.
Cooling-Function
Timer

SETTING THE FUNCTIONS

NOTE
a cycle of checks to verify its functionality.
Seite 19 von 24