Setting The Functions; Switching On The Appliance; Setting The Speed - be cool BC6AC2001FTL Bedienungsanleitung

All functions can be set directly on the appliance as well as by using the remote control.

SWITCHING ON THE APPLIANCE


Press the ON/OFF button to switch the appliance on.
As soon as the appliance is switched on, it runs at medium speed.

SETTING THE SPEED


Use the SPEED button to set and adjust the speed of the blower.

The respective display lights up on the control panel:
Press:
1 x press
2 x press
3 x press
OSCILLATION

Use the SWING button to activate the oscillation of the appliance. The display lights
up on the control panel.

To deactivate the function, press the SWING button again.
This function allows the blown-out air to be distributed to the left and right. This enables horizontal air
TIMER
 Use the TIMER button to switch off the appliance in a time-controlled way.

With each press on the timer button, the operating time is gradually extended by half an
hour each time, from 30 minutes to 7.5 hours.

Pay attention to the four indicators on the appliance:
o 1x press  30 minutes
o 2x press  1 hour  1H lights up
o 3x press  1.5 hours  0.5H + 1H lights up
o Etc.

SETTING THE FUNCTIONS

NOTE

Medium speed

High speed

Low speed
NOTE
distribution in the room.
 0.5H lights up
Seite 23 von 145