Controlpanel & Display details
Control elements
BEFORE USING THE APPLIANCE FOR THE FIRST TIME
Unpacking the Appliance
1. Open the carton and take out the appliance.
2. Remove all packaging from the appliance.
3. Unwind the mains cable completely and make sure not to damage it.
Transport wheels
For easier transport, the appliance is equipped with transport wheels.
In addition, two rollers are equipped with a locking brake to guarantee that they remain firmly
in position.
1. After the appliance has been carefully unpacked, insert the transport rollers into the
designated notches on the bottom of the appliance.
2. To adjust the locking brakes, press the levers as follows:
PRESS DOWNWARDS to fix the brake
PUSH UPWARDS to release the brake
INSTALLATION
Please note the following points for installation.
1. Place the appliance on a level and solid surface.
2. There must be at least a 50 cm gap to walls or other objects.
3. Before using the appliance, make sure that both the air inlet and the air outlet are free
of obstacles and are not blocked.
4. Connect the appliance to an earthed outlet.
COMMISSIONING
Seite 17 von 24
Indicators