Installing Software; Preparing For Installation - Compaq Bluetooth MultiPort Modul Installationshandbuch

Preparing for Installation

If you have previously installed a Bluetooth device, such as a
PC Card or USB adapter, you must uninstall the Bluetooth drivers
and software according to the instructions provided by the device
manufacturer.
Before installing software, install the Bluetooth MultiPort
Module as instructed in Chapter 2, "Installing Hardware."
For each computer that you want to add to the Bluetooth network,
follow the instructions in the sections that apply to the operating
system on your computer.
✎
After completing the software installation, refer to the Microsoft
Windows operating system manual included with your computer
for information about sharing network resources, such as printers.

Installing Software

1. Turn off the computer.
2. Install the Bluetooth MultiPort Module as instructed in the
Chapter 2, "Installing Hardware."
3. Turn on the computer and exit all application programs.
4. Insert the Bluetooth software CD into the CD drive of your
computer.
Installation Guide
Installing Software
3
3–1