Adjusting The Volume; Set Up Of The Agc System; How To Pair The Midland Btx2 Pro S To More Than Two Units - Midland BTX2 PRO S Bedienungsanleitung

Manual activation
When in "Intercom Mode" press the Middle button on one of the two units
in "Intercom" mode. Communication is enabled and remains active until you
press again the middle button. The intercom need some seconds to activate,
you will hear a beep tone when the intercom is open.
Voice activation (VOX)
Simply say something, after some seconds the communication will be opened
and will remain active for the time you are talking. If there is no conversation
the intercom will be closed after 40 seconds.
If needed you can close the intercom manually without waiting 40 seconds
(just press the middle button).
If needed, you can enable/disable the VOX feature simply by pressing the
Backward button for 7 sec. A voice announcement will advise you when the
VOX is enabled/disabled. To turn the VOX on again, just press the same but-
ton and a voice announcement will advise you that the VOX is now active.
This setting is remembered also if you turn off the unit.
Attention: The Voice activation (VOX) can open the intercom communication
only to the unit that was paired with the Middle button. If you choose to use a
different button (Forward or Backward ), you will be able to active the intercom
only manually.

Adjusting the volume

Your Midland BTX2 PRO S uses AGC technology, which automatically adjusts
the listening volume in relation to background noises.
However, it is also possible to manually adjust the volume by means of the
"Volume +" and "Volume -"buttons.
The volume setting is indipendent for each audio source: intercom, stereo mu-
sic, phone call, FM radio.
Attention: volume can be adjusted only when an audio connection is active.
www.midlandeurope.com

Set up of the AGC system

To adjust the sensitivity of the AGC system you can use the "BT UPDATER"
Pc Software or the smartphone "BT SET-APP" application. You can choose
different set up based on your motorbike type (naked, touring, sport) or if you
are riding as a passenger. You can disable the AGC system pressing "Volume +"
and "Volume -" together for 3 sec.

How to pair the Midland BTX2 PRO S to more than two units

One Midland BTX2 PRO S unit can be paired to maximum five other BT units,
that means six in total (3 Midland unit + 2 Talk2All + yourself).
The Midland BTX2 PRO S has three main buttons (Forward, Middle and Rear).
It is up to you which button to use to pair and activate the intercom, you are
totally free to choose the button you like more. The same button you will use
to pair the unit will be also used to activate the intercom communication.
Remember that each device can always be paired with other 3 units at your
choice; as shown in the picture here below, also 'crossed' pairing can be done.
Rider 2
For example you can decide to pair one motorbike rider unit to the Forward
button, your passenger to the Middle button and another rider to the Rear
button.
In this way you can have in total 4 units paired together and talk to each person,
one by one, simply by pressing the corresponding button (the same used for
the pairing). Every time you open the intercom connection to one person, the
Rider 1
Passenger 1
Rider 3
23