Silvercrest SUCC2 A1 Bedienungs- Und Sicherheitshinweise Seite 23

by plugging its USB plug into the USB
port type A
CAUTION!
If the control lamp
connecting with your external devices:
This indicate that the product is in
overload or fault condition. Please
unplug your external devices from the
product immediately.
IMPORTANT! You can leave
the motor on or off when using the
product. Be aware that the battery
of car might become low because
the product still consumes power
when the motor is off. Disconnect the
product completely from the power
supply if you are not intended to
charge your external devices.
Attention: Do not switch the
ignition on or off during the
charging process, as this can lead
to differences or peaks in the power
supply.
or .
1 2
3
lights off while
GB/IE 23