Storage; Ordering Accessories; Guarantee And Support; Frequently Asked Questions - Philips SCD570 Benutzerhandbuch

B
Warning:
Do not use cleaning spray or liquid cleaners.
Unplug the baby unit and the charger if they
1
are connected to the mains.
Clean the parent unit, the charger and the
2
baby unit with a dry cloth.
Clean the adapters with a dry cloth.
3

10 Storage

If you are not going to use the baby monitor for
some time, do the following:
• Remove the non-rechargeable batteries from
the baby unit.
• Remove the rechargeable batteries from the
parent unit.
• Store the parent unit, the baby unit and the
adapters in a cool and dry place.

11 Ordering accessories

To buy accessories or spare parts, visit
www.shop.philips.com/service or go to your
Philips dealer. You can also contact the Philips Consumer
Care Centre in your country (see the worldwide
guarantee lealet for contact details). If there is no
Consumer Care Centre in your country, go to your local
Philips dealer or a Philips service centre.
12 Guarantee and
support
If you need information or support, please visit the
Philips website at www.philips.com/support
or or contact the Philips Consumer Care Centre
in your country (see the worldwide guarantee
lealet for contact details). If there is no Consumer
Care Centre in your country, go to your local
Philips dealer or a Philips service centre.
22
13 Frequently asked
questions
This chapter lists the questions most frequently
asked about the appliance. If you cannot
ind the answer to your question, visit
www.philips.com/support for more frequently
asked questions or contact the Consumer Care
Centre in your country.
What is Eco Max mode? How does this mode
help the environment?
• The Eco Max mode has been developed to
enable you to reduce the energy consumption
of your baby monitor. When you monitor your
baby from a small distance, you can activate the
Eco Max mode. By switching on the Eco Max
mode, your baby monitor uses less energy and
is therefore more environment-friendly.
Why don't the power-on light of the baby unit
and the 'link' light of the parent unit come on
when I press the on/off buttons of the units?
• Perhaps the rechargeable batteries of the
parent unit are empty and the parent unit is not
plugged in. Insert the small appliance plug into
the charger and put the adapter in a wall socket.
Place the parent unit in the charger. Then press
the on/off button to establish connection with
the baby unit.
• Perhaps the non-rechargeable batteries of the
baby unit are empty and the baby unit is not
connected to the mains. Replace the non-
rechargeable batteries or connect the baby unit
to the mains. Then press the on/off button to
establish connection with the parent unit.
• If the 'link' light on the parent unit still does not
start lashing red, use the reset function to reset
the units to their default settings.