Automatic Rinsing Cycle - Philips HD8650 Benutzerhandbuch

, The on/off button lashes slowly and the warning light goes out.
5 After a few seconds hot water stops coming out of the coffee spout.
, The machine is heating up.

Automatic rinsing cycle

When the machine has heated up, it performs an automatic rinsing cycle
to clean the internal circuit with fresh water. This takes approximately one
minute.
1 Place a bowl under the coffee spout.
, The on/off button lashes slowly.
Water lows from the coffee spout. Wait until the water stops
2
coming out of the coffee spout.
Note: You can stop the automatic rinsing cycle by pressing the coffee button.
3 When the on/off button lights up continuously, the machine is ready
to brew coffee.
Note: The automatic rinsing cycle also takes place 15 minutes after the
appliance switches to standby mode or switches off.
Note: The irst cups of coffee may be a bit watery, this is normal. The machine
needs to complete a few brewing cycles to optimise its settings.
ENGLISH
11