STIEBEL ELTRON MES Bedienungsanleitung Seite 9

INSTALLATION
Safety
INSTALLATION
5. Safety
Only qualified contractors should carry out installation, commis-
sioning as well as maintenance and repair of the product.
5.1 General safety instructions
We guarantee trouble-free function and operational reliability
only if the original accessories and spare parts intended for the
appliance are used.
WARNING Burns
During operation, the tap can reach temperatures in ex-
cess of 60 °C.
Material damage
!
Scale build-up can block the outlet and thus subject the
water heater to pressure.
f Never block the swivelling spout, and use only aera- f
tors for non-pressurised valves, otherwise the water
heater could be damaged.
5.2 Instructions, standards and regulations
Note
Observe all applicable national and regional regulations
and instructions.
6. Appliance description
6.1 Standard delivery
MEW
www.stiebel-eltron.com
MEWC | MES
1 Spout with aerator
2 Tap body
3 Gasket
4 MES: Moulded plastic fitting
5 MEW: Pull rod
6 MEW: Drain trim
7 Mating fitting with spring sleeve (spanner size 13)
8 Fitting G 3/8
9 Butterfly valve
7. Installation
f Secure the tap with gasket, spring sleeve and mating fitting. f
f MES: Use the moulded plastic fitting to secure the tap in the f
kitchen sink.
f MES | MEWC: Fasten the spout to the tap body. f
MEW
1
2
3
4
5
6
8
9
f Fit the drain trim. Seal the upper drain fitting from above f
with suitable sealant.
1
2
3
4
7
8
9
MEW | MEWC | MES| 9