Appendix A: Optional Rubber Housing - Anton Paar DMA 35N Betriebsanleitung

Appendix A: Optional Rubber Housing

The DMA 35 measuring cell is made of glass and will break if the instrument is
N
accidentally dropped. For optimal protection against breaking the measuring cell, we
recommend using an optional rubber housing.
Mounting the rubber housing
• Remove the rubber cap from the top of the pump piston.
• Slip the pump piston through the opening in the rubber housing and fit the
DMA 35 into the housing.
N
• Re-attach the rubber cap onto the pump piston.
Maintenance and cleaning
• To clean the rubber housing, take it off the DMA 35
rubber housing and the DMA 35
B46IB01
Information:
The rubber housing does not improve the leak tightness of the
instrument.
Caution:
Check periodically and make sure that no residues from liquids
remain between the rubber housing and the instrument.
housing using a cloth.
N
Opening for
the pump piston
. Clean and dry both the
N
EN
39