Turning On The Instrument; Turning Off The Instrument - Anton Paar DMA 35N Betriebsanleitung

6.2

Turning On the Instrument

• Push the "ON/OFF" key for at least 2 seconds.
• The instrument performs a short self-test procedure, all required segments of
the display will light up.
• Subsequently, the °C (or °F) will start flashing, indicating that the instrument is in
the measuring mode.
6.3

Turning Off the Instrument

• Push the "ON/OFF" key until "OFF" appears on the display, then release the key.
• The DMA 35
N
B46IB01
is automatically switched off if no key is pushed for 15 minutes.
EN
17