Layout; Items Supplied - Parkside PASS 3.6 A1 Bedienungs- Und Sicherheitshinweise Originalbetriebsanleitung

Anleitung_LB7_4513427:_
replace them immediately if possible.
Storage of batteries, battery chargers
and cordless tools. Store the charger and
your cordless tool only in dry places with an
ambient temperature of 10-40°C. Store your
lithium-ion battery pack in a cool, dry place
at a temperature of 10-20°C. Protect them
from humidity and direct sunlight. Only
place fully charged batteries in storage
(charged at least 40%).
Prevent the lithium-ion battery pack from
freezing. Battery packs which were stored
below 0°C for more than 60 minutes must
be disposed of.
When handling batteries beware of
electrostatic charge: Electrostatic
discharges cause damage of the electronic
protection system and the battery cells.
Avoid electrostatic charging and never
touch the battery poles.
Rechargeable batteries and cordless electric
machines and tools contain materials that are
potentially harmful to the environment. Never
place any cordless electric machines or tools in
your household refuse. When cordless electric
machines or tools become defective or worn,
remove the rechargeable batteries and return
them to iSC GmbH (address: Eschenstrasse 6,
D-94405, Germany). If the rechargeable
batteries cannot be removed, return the
complete cordless machine or tool.
You can then be sure that the equipment will be
correctly disposed of by the manufacturer.
Downloaded from www.Manualslib.com
02.11.2010 9:37 Uhr
manuals search engine
Seite 11
When shipping or disposing of batteries
and cordless tools, always ensure that they
are packed individually in plastic bags to
prevent short circuits and fires.
Do not lose this safety information.
3. Layout (Fig. 1)
1. Bit chuck
2. LED lamp
3. Locking button
4. ON/OFF switch for lamp
5. Battery capacity indicator
6. Button for battery capacity indicator
7. Charging control lamp
8. Charging connection
9. ON/OFF switch
10. Clockwise/Counter-clockwise selector
switch
11. Battery charger
12. Charging cable
13. Torque selector
14. Locking sleeve

4. Items supplied

Take all parts out of the packaging and check
that they are complete.
Cordless Screwdriver PASS 3.6 A1
Battery charger
26 Bits
Bit holder
Case
Operating Instructions
GB/
CY
11