An overview of the operation panel can be found on page 18.
• Ensure that you are approx. 45 cm from the Sunshower.
Press the IR logo for an infrared session, or on the UV logo for an ultraviolet
•
session and put on the UV glasses.
•
The UV session is programmed for 10 minutes, the IR session is program-
•
med for 8 minutes.
The number of LEDs that light up on the display match the number of
•
minutes left of the standard session.
When you press the STOP button your session will end prematurely.
•
After each session the product will cool off before being able to be used
•
again. The cooling time will be displayed by flashing.
CLEANING AND MAINTENANCE
The outside of the Sunshower is the only part that can be cleaned by the user.
• The Sunshower can only be cleaned by hand.
• Never use a high pressure spray to clean the Sunshower.
• Do not clean the Sunshower when the unit is on.
Only use mild cleaning products for the Sunshower: glass cleaner or "general
cleaner" can damage the glass and make it glazed. There is a special maintenance
package available for the Sunshower. This package consists of a mild cleaner
and a protector, which protects the Sunshower against limescale. For additional
information email info@sunshower.nl.
Infrared logo (IR)
Ultraviolet (UV)
Koelsessie weergave
39