Installation - Sunshower Combi White Anleitung

INSTALLATION

WARNINGS
• PLEASE NOTE: NEVER OPEN THE SUNSHOWER, RISK OF ELECTRIC
SHOCK. INTERNALLY THERE ARE NO COMPONENTS THAT CAN
BE REPAIRED BY THE USER. LEAVE ALL REPAIRS TO AUTHORISED
PEOPLE.
• The electrical installation can only be carried out by a specialised company,
observing the legal guidelines and the national requirements concerning the
installation, for example, in the Netherlands NEN 1010 and international
IEC 60364-7-701.
• The Sunshower Combi White is an approved quality product and meets the
CE guidelines. For the correct operation of this product the user manual
must be adhered
• The Sunshower Combi White has a maximum capacity of 1995 W. Do
not connect other heavy electrical equipment to the same fuse group next
to the Sunshower. The unit must be connected to a fuse group which is
secured with a circuit breaker of 16A.
• Check whether the voltage (230 V) corresponds with the local mains
voltage before you connect the unit.
• Please ensure that you, prior to mounting and connecting the unit, switch
off the relevant circuit breaker in the fuse box (or deactivate the main
switch).
• Please ensure that the shower area has an open connection with the general
bathroom ventilation. The shower area cannot be closed with regards to
the cooling of the Sunshower Combi White.
• Keep 25cm free under the Sunshower Combi White to keep it cool.
• The Sunshower Combi White cannot be used in combination with a steam
cabin
• If the supply cord is damaged, it must be replaced by the manufacturer, its
service agent or similary qualified persons in order to avoid a hazard.
GUARANTEED ASSURANCE
At Sunshower not only are the materials used checked extensively, but also the
manufacturing processes and the functionality of the products. Regular tests
on UV transmission, waterproofness, impact resistance and
durability guarantee consistently high quality. All Sunshower
products are tested according to valid norms for UV & IR
output, waterproofness and resistance.
25