Sunshower Combi White Anleitung Seite 30

INSTALLATION: MOUNTING BRACE AND CABLE
BOX
Mount the bottom brace and the cable box with the help of the markings
which you have made to determine the height of the Sunshower.
Check whether the bottom brace is level. Mount the bottom brace with the
supplied plugs and screws. To prevent moisture problems in the wall it is
recommended to place kit between the bottom brace and the wall. Keep a
minimum of 25cm free under the Sunshower for the cooling of the Sunshower.
Ensure that there is no electricity running through the fixed wiring. This can be
done by switching off the relevant circuit breaker in the switching box or by
turning off the main switch.
Connect the fixed wiring with the terminal block in the cable box. Use the
cable gland to create a pull relief and a watertight connection. Fill the hole in
the wall with silicone kit.
30