Lighting Instructions - Napoleon Prestige PRO825-3 Bedienungsanleitung

8

Lighting Instructions

EN
!
WARNING!
WARNING!
supply valve.
2. Push and turn any main
burner knob to the high
position. If the pilot lights,
continue to push down on the
control knob until the burner
lights and then release.
3. If the pilot does not ignite,
then immediately turn the
control knob back to the 'off'
position and repeat step 2
4. If the pilot and burner will
not ignite within 5 seconds,
turn the control knob to
the 'off' position and wait 5
minutes for any excess gas to
dissipate. Either repeat steps 2
and 3 or light with a match.
5. If lighting the unit with a
match, clip the match into the
supplied lighting rod. Hold the
lit match down through the grill
and sear plate while turning
the corresponding burner valve
!
WARNING!
www.napoleon.com
Smoker Burner
Igniter
Left Rear
Left
Tube Burner
Centre
Burner
Tube
Burner
Open lid
Ensure all burner controls are in the off position. Slowly turn on the gas
Main Burner Smoker Burner
Lighting
1. Open grill lid. 1. Open grill lid.
2. Push and turn the
smoker burner control
knob to the high position.
3. Push and hold the
electronic igniter button
until the burner lights, or
light with a match.
several times.
4. If the burner will not
ignite within 5 seconds,
turn the control knob to
the 'off' position and wait 5
minutes for any excess gas
to dissipate. Repeat step 2.
to high.
Do not use rear burner while operating main burner.
Right Right Left
Smoker
Infra
Centre Tube
Tray
Tube Burner Red
Burner
Burner
Rear Burner Lighting
Lighting (if equipped)
1. Open grill lid.
2. Remove warming rack.
3. Push and turn the rear
burner control to the high
position.
4. Push and hold the
electronic igniter button
until burner lights, or light
by match.
5. If the burner will not
ignite within 5 seconds,
turn the control knob to
the 'off' position and wait 5
minutes for any excess gas
to dissipate. Repeat step 3.
Light
Right
Warming
Infra
Burner
Red
Burner
Off Position
Side Burner Lighting
(if equipped)
1. Open burner cover.
2. Push and turn the side
burner control knob to the high
position.
3. Push and hold the electronic
igniter button until the burner
lights, or light with a match.
4. If the burner will not ignite
within 5 seconds, turn the
control knob to the 'off'
position and wait 5 minutes
for any excess gas to dissipate.
Repeat step 2.
N415-0537CE-GB-DE Jul 13.20