Werbung
Verfügbare Sprachen
Verfügbare Sprachen
L Installation instructions for wall bracket for plasma / LCD TV
This bracket was especially designed for wall mounting flat screens with a weight of up to 75kg. It allows
your screen to be mounted flat on the wall and is extremely space-saving (the bracket itself has a depth of
only 3 cm). In addition, you can attach an adapter to tilt the bracket at a fixed angle of 5°.
Safety warning: Please have the bracket fitted by a qualified technician! Please check that the assembly set
is complete before installation and ensure that none of the parts are faulty or damaged. Use the bracket for
the intended purpose only. Before installing the bracket, check that the wall on which the television is to be
mounted is suitable for the weight and please note that the supplied rawl plugs are only for use with concre-
te and brick walls. If the wall on which the television is to be mounted is made of other materials, you should
buy special installation material from a specialist dealer. Once you have mounted the bracket and the flat
screen, check that they are sufficiently secure and safe to use. You should repeat this check at regular inter-
vals (at least every three months).
Hama GmbH & Co. KG does not accept warranty claims for improperly installed brackets or resulting dama-
ge.
Parts list:
a) Wall module (1)
b) Carrying arm (2)
c) Angle adapter 5° (4)
d) Washer (10)
e) Fastening screw (6)
f) Rawl plug (6)
g) Self-securing nut (4)
h) M6 x 60 mm carriage bolt (4)
i) M4 x 30 mm screw (4)
j) M5 x 30 mm screw (4)
k) M6 x 30 mm screw (4)
l) M8 x 25 mm screw (4)
m) M8 x 40 mm screw (4)
n) Washer (12)
o) Plastic spacer, small (4)
p) Plastic spacer, large (4)
q) Safety rail (1)
r) Rubber plug (1)
a)
g)
h)
b)
n)
i) / j) / k) / l) m)
d)
c)
o) / p)
q)
f)
e)
r)
Werbung
