Product Loading - Smart Mode; General Enables); Vending A Product - FAS International EASY 6000 T Handbuch

42

10.2.1 PRODUCT LOADING - SMART MODE

E
N
G
L
I
S
H
a) Open the door.
b) Press the
c) Close the door. The vending machine will display the situation for disk 1: the number of the currently
accessible compartment is displayed, as well as the total number of compartments and the number of
compartments loaded. Loading is possible if there are empty compartments, otherwise possible options
are to unload products or select another disk.
d) If loading is selected, the vending machine will identify the first empty compartment or any which contain
expired products. This compartment will go to the sales position and the corresponding hatch will open to
allow a new or replacement product to be loaded.
e) After inserting the new product, confirm to record the presence of the product in the compartment and the
date it was inserted used to check the expiry date set using the
will be automatically stored. If no product is inserted, press SKIP to go to the next compartment. The
procedure continues until all compartments have been registered or another disc is chosen for loading.
You can qui loading mode at any time by pressing END LOADING
f) When loading a Fifo selection, each compartment must be loaded in sequential order without leaving
any gaps. If you do not have sufficient products to fill a Fifo selection: press the CONFIRM button after
loading the last product and then quit loading (END LOADING) or select the next plate to reload.

10.3 VENDING A PRODUCT

After loading in accordance with instructions, set the sales prices, filled the change-giver tubes (if the vending
machine is equipped with a coin changer and change tubes) and made sure that the "Vending machine in
operation... .. " message appears on the display, the vending machine is ready to operate.
Depending on the SHOPPER / FIFO operating mode chosen, there will be two different screens.
SHOPPER: Rotate the discs by pressing the shopper
into the sales position.
Check the cost of the product on the display.
Insert money.
Confirm the product selected by pressing the icon corresponding to the chosen disc
Take the product from the compartment that opens automatically.
FIFO: Check the cost of the product on the display.
Insert money.
Confirm the product selected by pressing the icon corresponding to the chosen disc
Take the product from the compartment that opens automatically.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
This loading mode stores the product loading date; the machine is consequently able to
identify expired products.
Correct operation requires setting the date, time and number of days to expiry
(see Disc Configuration).
Load products icon on the tablet from the screen displayed when the door is open
(SEE

GENERAL ENABLES)

button icon to bring the product to be purchased
EASY 6000 T– Issue 00
Disc configuration command