FAS International EASY 6000 T Handbuch Seite 26

22
MDB
Maximum cash credit: it is possible to set the max credit accepted by the coin mechanism by either
key/card or cash is set, and if this amount is exceeded acceptance of further coins or banknotes is blocked.
E
N
Maximum cashless credit it is possible to set the maximum credit accepted by the coin mechanism for
G
key/card purchases.
L
I
Maximum change: the maximum quantity of coins that can be returned; default value 1000, max value 9000.
S
H
Maintaining overpay: ticking this box enables the option to maintain overpay at the user's disposal for an
indefinite period of time.
Purchase obligation before change is given: when this box is ticked, the customer is obliged to complete
the purchase before receiving change. This is to prevent the coin mechanism being used as a coin-changer.
If the purchase does not happen, change will be given.
Minimum level of tubes: This is the number of coins for each coin box mechanism which must remain in
each tube in order to guarantee the correct function of the coin delivery system. (Consult the manual of the
coin box mechanism for instructions on setting the correct value of this parameter). If a different value is
associated to each tube, the maximum value set must be between those indicated. The setting of this
parameter is fundamental for ensuring the correct coin management by the vending machine.
N.B. The inventory of the tubes, icon
reaches the value set at Minimum tube level. To empty the tubes completely, use the coin box mechanism
delivery push-buttons.
Enable acceptance of banknotes in exact amount condition: tick this box under exact amount conditions
inhibits the banknote reader.
Update content of change-giver tubes from coin mechanism: select whether to use the counters
corresponding to the content of the coin mechanism change-giving tube or use only the counters inside the
machine. When the box is ticked, at each power-up the counters inside the machine which correspond to the
content of the change giving tubes are updated with the values transmitted by the coin mechanism.
Inhibit cashless credit display: prevent or enable display of credit from the MDB cashless device (key or
card reader). When the box is ticked, the credit for the cashless device is not displayed
Level of coins for exact amount: This command is for setting (for each change giving tube) the
number of coins below which the machine can be considered to be in a condition of 'no coins available for
change'. The set value must always take into consideration the coin minimum level in the tubes, i.e. it must
be higher than the milk (example: if the Minimum level of tubes is set to 5, the values set in this command
must have a minimum value of 6). The tubes that are not included in this condition must be set at "0".
When the contents of any one of the tubes included in the condition drops below the corresponding set value
the machine displays the warning that there are no coins available for change.
Enable coins: enable/disable acceptance of particular coins by the coin mechanism.
Enable notes: enable/disable acceptance of particular banknotes by the reader.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
located in Tube filling, stops when the contents of each tube
EASY 6000 T– Issue 00