FAS International EASY 6000 T Handbuch Seite 21

EASY 6000 T– Issue 00
Price setting: this drop-down menu displays the options for dividing the prices for each disk. the following
possibilities are available:
a) 1 price : associates prices 1-8 with discs 1-8.
b) 2 prices: each plate is divided into two halves which can be given different prices. The first half of each
plate refers to prices 1-8 while the second half of each plate refers to prices 9-16. Inasmuch, price 9
corresponds to the second half of disc 1, price 10 to the second half of disc 2, etc.
c) 3 prices: each plate is divided into 3 sections, each of which refers to a different price. The first section of
plates 1-8 is associated with prices 1-8; the second section with prices 9-16 and the last section with prices
17-24.
Discount mode: the following discount types are possible depending on the option chosen in the drop-down
menu:
•
no discount.
•
discount in certain time slots
•
discount on purchases with key/credit card (only possible in MDB mode).
•
discount for time slots and purchases with key /credit card (only possible in MDB mode).
N.B. To apply discount by time slots, the time slots required in the weekly timer must be defined.
For machines with the cashless system this command makes it possible to apply different price tables. The
selection of the table to be applied at the time of sale occurs automatically through the communication
protocol between machine and reader (only possible for MDB cashless systems which are provided with this
option).
Buzzer enable: tick the box to enable operation of the buzzer during machine operation.
Reduce standby lighting:
sub-menu ). If this option is disabled, the LEDs are completely switched off.
Switch off lighting when door is open:
Enable internal temperature and evaporator temperature display: by flagging this box, both the internal
temperature of the vending machine and the evaporator temperature will appear on the main screen in the
STAND BY status
Microwave module management enable: enable/disable microwave oven column operation.
Enable slave: this command enables the master/slave connection. It is possible to connect one slave snack
machine. Once the box has been flagged in the main menu screen, the
will appear which allows access to the various settings of the slave machine connected.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
tick this box to reduce brightness during energy-saving slots (see Weekly Timer
Enable/disable the LED off with door open option
17
Slave programming icon
E
N
G
L
I
S
H