Update Interface Type - FAS International EASY 6000 T Handbuch

34
E
8.3.1
N
G
INTERFACE: Identifies an interface in terms of graphics (colours, layout, button style...), operation
L
(category/selections, alphanumeric keypad, icon selection, sequence of screens to reach product selection).
I
S
H
After setting the correct interface code in the ID parameters,
type.
The update can be performed remotely (if the tablet is connected to the internet) or locally, in which case the
interface file must be pre-loaded on to the tablet using a USB pen drive.
Remote upgrade is completely automatic: the tablet connects to the specific server, downloads and installs
the file and then runs the interface.
The interface file is a compressed file (.zip extension) the name of which is formed from any alphanumeric
sequence of up to 20 characters (e.g. INTERFACCIA00000003.zip). To load this file up to the tablet after
copying it to a USB pen drive, proceed as follows:
Insert the key into one of the USB Hub ports highlighted in the photo
select the "copy from USB" icon
window open allowing you to select the desired file from the USB key that will be automatically copied to the
tablet. When copying is complete, the "Interface Update" icon is displayed that installs and runs the interface.
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it

UPDATE INTERFACE TYPE

in the Control Panel and then the "Select file" icon
EASY 6000 T– Issue 00
use this icon to update the interface
; a dialogue