FAS International EASY 6000 T Handbuch Seite 25

EASY 6000 T– Issue 00
BDV
Maximum credit: it is possible to set the maximum credit accepted by the coin mechanism. If this value is
exceeded, acceptance of further coins is blocked.
Maximum change: This function is active only in multi-sale. If the value of the remaining credit after a sale is
greater than the value set in this line, giving change will be blocked. It will therefore be necessary to carry out
further purchases until the remaining credit will be lower than the set value. By moving the return lever it will
be possible to obtain the return.
The Price-display function can be enabled/disabled. When enabled, the machine will exclusively use the price
information indicated by the payment system.
Level of coins for exact amount: a value between 0 and 15 representing the number of coins to be added
to the minimum level fixed in the coin return tubes - can be programmed, in order to quit the "exact amount"
condition.
Exact amount equation
It represents the combination of empty spaces in the tubes so that the exact amount message can be
activated. Here is a list of possible combinations:
0 = A or (B e C)
3 = A and (B o C)
6 = A or B or C
9 = only B e C
12 = only C
Enabling credit card reader: it is possible to tick the box and enable the credit card function.
The icon Inhibit coins can be used to block acceptance of particular coins by the coin mechanism.
The icon Inhibit exact amount coins is used to block acceptance of certain coins when very little
change is due, i.e. when the display shows the message "Insert exact amount only".
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
1 = A and B and C
4 = only A
7 = only A and C
10 = only B
2 = only A and B
5 = only A or B
8 = only A or C
11 = only B or C
21
E
N
G
L
I
S
H