FAS International EASY 6000 T Handbuch Seite 29

EASY 6000 T– Issue 00
8.2.5.1 DISC CONFIGURATION
This section is used to modify the machine's configuration parameters and certain operating modes Select
the number corresponding to the disk to be configured to access the following sub-menu:
Number of sectors: set the number of divisions for the plate selected. Permitted values are: 4, 6, 8, 12, 16,
24, 48.
Delivery mode: used to select the operating mode of the plate in question. It is possible to choose shopper
mode or select fifo mode so that products are delivered in the order they were loaded (first in, first out).
Expiry days: indicates the number of days from the expiry date for the products loaded in the selection
starting from the previous midnight. This value is only effective if the machine is operating in intelligent
loading mode; sales of products not sold by the set date are inhibited.
8.2.5.2 PRICES
Each section can be accessed by clicking on the corresponding image of the disc on the screen displayed
(the number of columns varies depending on the number of sections set at different prices).
A single price can then be set for the entire disk if this price configuration is selected under
enables
After setting the price, it can also be applied to the entire disc or the entire machine by ticking the appropriate
box
If the configuration is set for 2 or 3 prices, the machine operates in accordance with price lines.
If 2 prices are set per disc, each disc will be divided into 2 equal sections. Products on sale at 2 different
prices may therefore be loaded on the same disc. If 3 prices per disc are set, products on sale at 3 different
prices may therefore be loaded on the same disc. The following tables will help you associate each disk
compartment with the corresponding price line:
FAS INTERNATIONAL S.p.A. Via Lago di Vico, 60 SCHIO (VI) – tel. +39 0445 502011 – fax +39 0445 502010 - e-mail: info@fas.it
25
E
N
G
L
I
S
H
General