Setting A Different Channel; Reception; Transmission - Silvercrest SPMR 8000 B1 Bedienungsanleitung

9.3. Setting a different channel

When setting a different channel, this needs to be done on both PMR sets for you to be able to
communicate with the remote station.
If no button is pressed for five seconds while changing a setting, the handheld transceiver
will return to idle mode and use the previously adjusted setting.

9.4. Reception

The handheld transceiver will be in receive mode as long as it is powered on and not transmitting (idle
mode).

9.5. Transmission

 Press the Menu
the display.
 Press the Up  [10] or Down  [7] button to set a different channel.
 Press the PTT button [12] to confirm the setting.
 Keep the PTT button [12] pressed. The TX icon will appear on the display [1].
 Speak into the microphone [9]. Hold the handheld transceiver vertically and
approx. 10 cm (4 inches) from your mouth.
 Release the PTT button [12] when you are done with your message.
button [6] once. The current channel number will flash on
SilverCrest SPMR 8000 B1
English - 47