Werbung
Safety Instructions for Using and Storing the Unit
Safety Instructions for Using and Storing the Unit
•
Do not use or store the flash unit in environments with flammable gases or flamma
•
Do not use or store the flash unit in environments with flammable gases or flammable
liquids.
liquids.
•
Do not store flammable materials such as decorative fabrics, paper or similar items
•
Do not store flammable materials such as decorative fabrics, paper or similar items in the
immediate vicinity of the unit.
immediate vicinity of the unit.
•
Handle glass parts like the flash tube with care so that you do not break the glass.
•
Handle glass parts like the flash tube with care so that you do not break the glass. Do not
touch the flash tube with bare hands, use clean cotton gloves or a microfibre cloth.
touch the flash tube with bare hands, use clean cotton gloves or a microfibre cloth. Small
residues of skin grease can cause the flash tube to burst.
residues of skin grease can cause the flash tube to burst.
•
Switch off the flash and disconnect it from the power supply (battery) when changi
•
Switch off the flash and disconnect it from the power supply (battery) when changing the
flash tube.
flash tube.
•
Do not insert metal parts into the unit.
•
Do not insert metal parts into the unit.
•
Do not open or damage the battery, short-circuit it, bypass it or use it for any other
•
Do not open or damage the battery, short-circuit it, bypass it or use it for any other
purpose.
purpose.
•
Keep the battery away from children, open fire and liquids and do not expose it to
•
Keep the battery away from children, open fire and liquids and do not expose it to
temperatures above 50°C. In addition, follow the battery care instructions on page
temperatures above 50°C. In addition, follow the battery care instructions on page 16 of
this manual.
this manual.
•
To charge the battery, disconnect it from the flash unit. Use only the charger includ
•
To charge the battery, disconnect it from the flash unit. Use only the charger included in
the scope of delivery to charge the battery. Connect the charger for charging first t
the scope of delivery to charge the battery. Connect the charger for charging first to the
battery to be charged and then to the power supply.
battery to be charged and then to the power supply.
•
Make sure that the tilt lock is firmly tightened before using the unit and connecting
•
Make sure that the tilt lock is firmly tightened before using the unit and connecting
accessories to it.
accessories to it.
•
Mount the flash unit on a tripod with sufficient load-bearing capacity and set up the
•
Mount the flash unit on a tripod with sufficient load-bearing capacity and set up the tripod
so that it cannot tip over or slip.
so that it cannot tip over or slip.
•
Disconnect the battery unit from the flash for storage or transport.
•
Disconnect the battery unit from the flash for storage or transport.
•
Let the flash unit cool down before packing it for transport or storage.
•
Let the flash unit cool down before packing it for transport or storage.
•
Caution: This product may emit dangerous optical radiation. Do not look into the op
•
Caution: This product may emit dangerous optical radiation. Do not look into the operating
lamp, this may be harmful to the eye.
lamp, this may be harmful to the eye.
Werbung
