Werbung
JINBEI Lithium Battery Maintenance
JINBEI Lithium Battery Maintenance
Warranty: Jinbei provides 6 months warranty towards Lithium batteries.
Warranty: Jinbei provides 6 months warranty towards Lithium batteries.
1 According to industry standards, lithium battery supports 300 – 500 times complete
1 According to industry standards, lithium battery supports 300 – 500 times complete
charge cycles in its lifespan. Capacitance of a lithium battery goes down with times of use.
charge cycles in its lifespan. Capacitance of a lithium battery goes down with times o
Complete charge cycle means to charge the battery from quantity less than 10% to over
Complete charge cycle means to charge the battery from quantity less than 10% to o
90%.
90%.
2 Lithium batteries are of no memory effects, thus support charging on demand. lt will extend
2 Lithium batteries are of no memory effects, thus support charging on demand. lt will e
battery lifespan with incomplete charge cycle.
battery lifespan with incomplete charge cycle.
3 When quantity is running low level, it is highly suggested the battery is charged immediately
3 When quantity is running low level, it is highly suggested the battery is charged imme
to avoid irreversible damage. Do NOT charge the battery continuously over 24 hours.
to avoid irreversible damage. Do NOT charge the battery continuously over 24 hours
Charge the battery for 0.5 – 1 hour with matching charger every 3 months when it's idle, to
Charge the battery for 0.5 – 1 hour with matching charger every 3 months when it's id
ensure the battery keeps 40% – 60% quantity.
ensure the battery keeps 40% – 60% quantity.
4 Long-term storage (over 3 months) requires an environment with temperature of 20 ±10°C
4 Long-term storage (over 3 months) requires an environment with temperature of 20 ±
(10 – 30°C) and humidity of 65 ±20%RH. Lithium battery service life is affected by
(10 – 30°C) and humidity of 65 ±20%RH. Lithium battery service life is affected by
temperature. 0 – 40°C is the ideal environment.
temperature. 0 – 40°C is the ideal environment.
5 Knocking, needling, watering and treading are harmful to battery.
5 Knocking, needling, watering and treading are harmful to battery.
Keep the battery away from heart pacemaker, flammable gas, sun exposure, microwave and
Keep the battery away from heart pacemaker, flammable gas, sun exposure, microwa
high pressure. Do NOT dismantle the battery to avoid safety risks.
high pressure. Do NOT dismantle the battery to avoid safety risks.
6 During the charging or discharging process of the lithium battery, if there are odors and
6 During the charging or discharging process of the lithium battery, if there are odors an
noises or it expands or runs out, stop charging or discharging immediately and contact your
noises or it expands or runs out, stop charging or discharging immediately and conta
Jinbei retailer.
Jinbei retailer.
Description of continuous flash shooting:
Description of continuous flash shooting:
If the flash fires continuously at full power for a longer period of time, the temperature of the
If the flash fires continuously at full power for a longer period of time, the temperature of
flash head will increase. To prevent the flash head from being worn or damaged by overheating,
flash head will increase. To prevent the flash head from being worn or damaged by over
the HD-200 Pro automatically activates the overheating protection and initially reduces the
the HD-200 Pro automatically activates the overheating protection and initially reduces t
recycling time. At a temperature of 25°C, the flash fires continuously at full power every 1.3s for
recycling time. At a temperature of 25°C, the flash fires continuously at full power every
approximately 50s, then the recycling time is automatically extended to 2s and the flash
approximately 50s, then the recycling time is automatically extended to 2s and the flash
continues firing until the overheat protection is activated and "OH" appears on the display. The
continues firing until the overheat protection is activated and "OH" appears on the displa
symbol disappears again when the flash cools down.
symbol disappears again when the flash cools down.
Werbung
