6 Environmental Concerns - AEG S72100WSB1 Benutzerhandbuch

56
eNViroNmeNTaL CoNCerNS
Downloaded from www.Manualslib.com
Malfunction Possible cause
heavy build up of
door seal is not air tight
the frost, possibly
(possibly after changing
also on the door
over the hinges).
seal.
appliance is not level.
the appliance is touching
the wall or other objects.
unusual noises.
a component, e.g. a pipe,
on rear of the appliance is
touching another part of
the appliance or the wall.
the compressor
does not start
immediately this is normal, no error has
after changing occurred.
the temperature
setting.
Water on the Water drain hole is
floor. blocked.
the symbol on the product or on its
packaging indicates that this product
may not be treated as household
waste. instead it shall be handed over
to the applicable collection point
for the recycling of electrical and
electronic equipment. By ensuring this
product is disposed of correctly, you
will help prevent potential negative
consequences for the environment and
manuals search engine
remedy
Carefully warm the leaking
sections of the door seal with
a hair dryer (not hotter than
approx. 50 °C). at the same
time shape the warmed door
seal by hand such that it sits
correctly.
readjust the feet.
move the appliance slightly.
if necessary, carefully bend the
component out of the way.
the compressor starts after a
period of time.
see the "Cleaning" section.
human health, which could otherwise
be caused by inappropriate waste
handling of this product. For more
detailed information about recycling
of this product, please contact your
local city office, your household waste
disposal service or the shop where you
purchased the product.