LAVAZZA EP2100 ESPRESSO POINT Gebrauchsanweisung Seite 13

EP2100-2200:Gettoniera EP2200
Improper machine use during operation, cleaning or maintenance can cause damage.
Before connecting the machine to the mains, make sure the following conditions are
complied with:
1) Flat, stable horizontal support surface
To work properly, the "Espresso Point" machine needs to be positioned on a
sufficiently stable horizontal surface to avoid it tipping up or falling accidentally.
2) Good air circulation
The "Espresso Point" machine gets hot so it must therefore be positioned in a large
enough environment to avoid overheating.
Don't put the machine near electric or gas radiators or inside hot ovens.
3) Suitable Fittings.
The machine "Espresso Point Gettoniera" can be connected to a coin box or to a
Cappuccino delivery device (separately one from the other or simultaneously);
use only appliances suggested by the manufacturing company.
The "Espresso Point" machine is designed to function at:
230 V 50 Hz (EP 2100 - EP 2200).
NEVER insert the machine's power plug into a socket with a different voltage.
The socket used must be earthed.
Please check the feeder: it must be placed properly on the support surface of the machine
and it mustn't be put on hot surfaces.
Only components that operate at mains voltage are fitted to the machine. For this reason
NEVER remove the machine's outer casing or carry out repairs.
Don't use the machine with a damaged feeder or when the machine doesn't work
properly. Arrange for repairing the machine before using it again.
Repairs must ONLY be performed by qualified personnel/engineers.
Do not expose the machine to weather conditions and do not immerse in water.
Downloaded from www.Manualslib.com
16-03-2010
manuals search engine
15:36 Pagina 11
11
GB