Connecting A Computer - Rollei Skibrille 135 Full-HD Anleitung

3. Choose update with "Y" means you can update the new data, default setting is "N",
restart the camera to activate the setting
Setting.txt
Status 0
EV 0-12
Light Frequency 60HZ
RTC Display time stamp off
Resolution 1080P
NOTE: Users can choose 50HZ or 60HZ by this setting to avoid flickering in the
video while shooting indoors; you need to adjust this setting to match the frequency
of light source
LED Status
Status Green light
Power on Stay on
Power off off
Recording Stay on
No card or Quick flash 5 times
memory is full and goes off
Quick flash for5-
Low battery
10sec and then off
Charging off
Full charge off
Time setting
1. Create a .txt document named "settime.txt" with Microsoft Word, Word Pad or
any other word processing software.
2. Open the new Text document, input the local true time according to the following
set form. For example: The present London time is: 06:09:01, 8th, Jul, 2013,
The syntax of the input must look like this: 2013 07 08, 06 09 01(space needed
between each number).When finished save the file and exit.
3. Connect the goggle to your PC and open the removable disc. Copy the "Settime.
txt" file to the Root directory of the SD card.
4. Disconnect the camera from your PC.
1 Default setting
0-12 6
50HZ 0
time stamp on 1
720P 0
Blue light Red light Vibration
off off Vibrate 1 sec
off off Vibrate 2 sec
Flash once per sec. off Vibrate 0.5 sec
Quick flash 5 times Vibrate 2 sec,
off
and goes off then off
Vibrate 3 times,
off off
then off
off on N/A
off off N/A
5. The camera will automatically use the new date and time when you switch the
goggles on the next time.
6. To see the time stamp on your video and photos you must enable the time stamp
function as described on page 6, chapter "Setting Menu".
Charge with USB cable
Turn the camera off, then plug the camera with the rechargeable battery to a
computer with the
USB cable provided
The blue LED will light up to show the battery is charging.
The blue LED will be turned off when the battery is fully charged.
The rechargeable battery can work nearly 90-100 Minutes under the
1080P@30FPS or 720p@60fps; a full charge will take 2-3 hours.
NOTE
Ensure the card is inserted correctly
Do not touch the connect terminals on the back of the micro SD card
The card may be damaged if it is not fully inserted
The card and the data may be damaged if the micro SD card is inserted or removed
while the camera is on
Do not touch the cable connector as this may affect the camera performance and functions
The camera supports micro SD/SDHC Class 4 cards or above and compatible up to 32GB.
Micro SD cards with lower classes may cause performance drop during recording.

Connecting a computer

You can upload your recorded video footage and photos on a computer when
enabled the Computer and camera.
1. Turn the camera on.
2. Connect your camera to a computer using the USB cable.
3. It will show the removable disk when connected successfully.
4. Using the computer software to process the video and photo.
5. When exit please click the removable disk and then remove the USB cable.
Waterproof feature
This camera has passed waterproof IP68; we will not be responsible for camera
malfunction caused by liquid entering the camera as a result of misuse by the user.
Liquid may get inside the camera if the USB port is not firmly locked.
If the camera gets wet, wipe the liquid off as soon as possible with a dry cloth.