Hub1616 - Ecler HUB Serie Bedienungsanleitung

10.2 HUB1616

DIGITAL
DSP
Converters
ANALOGUE
Input 1, 2, 3, 4 (Line)
Input 5, 6, 7, 8 (Mic/Line)
Input 9 to 16 (Remote Input)
Outputs 1 to 16 (Line)
Headphones output
CPU Floating point 32/64bit
Sampling rate 48 kHz
Latency <1.5 ms.
Resolution 24 bit, AKM
Dynamic range AD:111dB, DA: 115dB
Sensitivity +5 / -15dBV External potentiometer adjust
Impedance >13k
Input headroom 12dBV
Connector RCA female. Input 1 and 2 with Euroblock stack
Type Unbalanced
Sensitivity +0 / -50dBV External potentiometer adjustment
Impedance >24k electronically balanced
Input headroom 12dBV
Connector Euroblock (Symmetrical)
Type Balanced
Pagers Input 7 and 8 (by RJ45 connector)
Phantom +48VDC (rear panel switch)
CMRR >60dB (20Hz - 20kHz)
Sensitivity 0 dBV without adjustment
Impedance >24k electronically balanced
Input headroom 12dBV
Connector RJ45 Connector
Type Balanced
CMRR >60dB (20Hz - 20kHz)
Max output level 12dBV
Connector Euroblock 3-pin
Type Balanced
Selectable output From Out1 to Out16
Power >200mW – 200Ω
Connector Mini-Jack 3,5mm
34