8.0 Operating instructions
Before initial start-up of the heater, check the following:
1. The electrical connection is conducted in accordance with the relevant rules and
regulations.
2. The protective conductor (PE) has been connected and, if necessary, the external earth
connection between housing and ground has been effected, e.g. for avoiding
electrostatic discharge.
3. All louvres on the front grille are at least 50% open.
8.1 Adjustment of the room thermostat in e-enclosure (option).
WARNING
-
Do not open the junction box when energized
Open the junction box by unscrewing the bolts on the lid. The room thermostat is located
according to wiring diagram – standard in the position as shown below:
Use a screwdriver to adjust the thermostat to the
desired temperature.
25
08099905