Mounting - Jevi VLEx-Serie Installations- Betriebs Und Wartungshandbuch

The heater can be mounted on the wall by means of the mounting slot holes on the back:
Additionally, the heater has 4 mounting holes on the top and the bottom. To enable the
use of the mounting holes on top, the 4 lifting eyes must be dismounted. In order to keep
the safety distance to the ceiling see section 2.3 Mounting height. Use a beam to support
the heater during the installation.

6.3 Mounting

The installation must be carried out by sufficient qualified personal authorized for executing
this task in an industrial environment. Be sure that the installed cables comply with local
regulations. The power cable must be fused at the supply side, ref. marking plate – notice
max power consumption on marking plate.
22
08099905