Technical Data; Declaration Of Conformity; Battery Charging - Bosch GST 14,4 V Professional Originalbetriebsanleitung

Technical Data

Cordless Jigsaw
Article number
Rated voltage
Stroke rate at no load n
Stroke
Cutting capacity, max.
– in wood
– in aluminium
– in non-alloy steel
Bevel cuts (left/right), max.
Weight according to
EPTA-Procedure 01/2003
Please observe the article number on the type plate of your machine. The trade names of the individual machines
may vary.

Declaration of Conformity

We declare under our sole responsibility that
the product described under "Technical Data" is
in conformity with the following standards or
standardization documents: EN 60745 accord-
ing to the provisions of the directives
2004/108/EC, 98/37/EC (until Dec. 28, 2009),
2006/42/EC (from Dec. 29, 2009 on).
Technical file at:
Robert Bosch GmbH, PT/ESC,
D-70745 Leinfelden-Echterdingen
Dr. Egbert Schneider
Senior Vice President
Engineering
18.12.2007, Robert Bosch GmbH, Power Tools Division
D-70745 Leinfelden-Echterdingen
Bosch Power Tools
Downloaded from www.Manualslib.com
0
Dr. Eckerhard Strötgen
Head of Product
Certification
manuals search engine
GST 14,4 V
Professional Professional
0 601 598 4.. 3 601 E98 3..
V= 14.4
0 – 2100
spm
mm 26
mm 65
mm 10
mm 6
° 45
kg 2.9
Assembly
Before any work on the machine itself (e.g.
maintenance, tool change, etc.) as well as
during transport and storage, remove the
battery from the power tool. There is danger
of injury when unintentionally actuating the
On/Off switch.

Battery Charging

A battery that is new or has not been used for a
longer period does not develop its full capacity
until after approx. 5 charging/discharging cy-
cles.
To remove the battery 4 press the unlocking but-
tons 3 and pull out the battery downwards. Do
not exert any force.
The battery is equipped with a NTC temperature
control which allows charging only within a tem-
perature range of between 0 °C and 45 °C. A long
battery service life is achieved in this manner.
A significantly reduced working period after
charging indicates that the battery is used and
must be replaced.
Observe the notes for disposal.
English | 21
GST 18 V GST 24 V
Professional
0 601 598 2..
18 24
0 – 2100 0 – 2100
26 26
68 70
11 12
7 7
45 45
3.2 3.6
1 609 929 N47 | (29.1.08)