WARNINGS:
• DO NOT use bedside sleeper if any parts are missing, damaged, or broken.
Contact your supplier for replacement parts and instructional literature if nee-
ded. DO NOT substitute parts.
• To prevent a suffocation hazard from entrapment, the bedside sleeper shall be
properly secured to the adult bed using the attachment system.
• Check the tightness of the attachment system before each use by pulling the
bedside sleeper in a direction away from adult bed.
• If there is any gap between the bedside sleeper and the adult bed DO NOT use
product.
• Gaps should not be filled with pillows, blankets or other items.
• To avoid hazards from the child's neck being caught on the top rail on the side
that is next to the adult bed, the top rail must not be higher than the adult bed
mattress.
• To avoid the risk of your child being strangled the attachment system to the
adult's bed shall always be kept away from and out of the crib.
• The attachment system shall be provided and the user shall not use other at-
tachment system.
• The bedside sleepers shall never be used in an inclined position
• THIS BEDSIDE SLEEPER MUST BE ONLY USED WITH STANDARD TYPE ADULT BEDS.
DO NOT USE the bedise sleeper with atypical shape beds.
• The height from the floor of the adult bed on which the bedside sleeper may be
installed shall be between 45 and 60 cm.
Max.18cm
Max.38cm
16
Min.11cm Min.45-Max.60cm
Side Crib
Max.18cm
Min.45-Max.60cm
Max.38cm
Min. 4cm