Husqvarna PG 400 Petrol Bedienungsanweisung Seite 9

WARNING: Use 2 hands and 1 foot
when you fold the handle.
Note: Put a protection between the engine and the
electrical enclosure to prevent damage to the
product.
3. Make sure that the handle is fully folded.
4. Remove the lock knobs (A) to loosen the support
frame (B).
A
B
883 - 001 - 07.11.2019
5. Hold the handlebar to keep the handle stable and lift
the support frame out and up.
6. Select the applicable position for the support frame
and tighten the lock knob. The bottom hole increases
the grinding pressure and the height of the
handlebar. The top hole decreases the grinding
pressure and the height of the handlebar.
7. Put the product in operation position.
Diamond tools
There are many types of diamond tools for the product.
Speak to your approved service center or go to
www.husqvarnacp.com to select correct diamond tool.
9