Product Description And Specifications - Bosch Uneo Originalbetriebsanleitung

 In case of damage and improper use of the battery, va-
pours may be emitted. Ventilate the area and seek
medical help in case of complaints. The vapours can irri-
tate the respiratory system.
Safety Warnings for Battery Chargers
 This charger is not intended for use
by children and persons with phy-
sical, sensory or mental limitations
or a lack of experience or know-
ledge. This charger can be used by
children aged 8 and by persons
who have physical, sensory or men-
tal limitations or a lack of experi-
ence or knowledge if a person re-
sponsible for their safety
supervises them or has instructed
them in the safe operation of the
charger and they understand the
associated dangers. Otherwise,
there is a danger of operating errors
and injuries.

Supervise children during use,
cleaning and maintenance. This will
ensure that children do not play with
the charger.
 Only charge Bosch lithium-ion
batteries with a capacity over
1,3 Ah (more than 4 battery cells).
The battery voltage must match
the battery charging voltage of the
charger. Do not charge non-re-
chargeable batteries. Otherwise
there is danger of fire and explosion.
Keep the battery charger away from rain or mois-
ture. Penetration of water in the battery charger in-
creases the risk of an electric shock.
 Charge the power tool only with the supplied charger.
 Keep the battery charger clean. Contamination can lead
to danger of an electric shock.
 Before each use, check the battery charger, cable and
plug. If damage is detected, do not use the battery
charger. Never open the battery charger yourself.
Have repairs performed only by a qualified technician
and only using original spare parts. Damaged battery
Bosch Power Tools
Downloaded from www.Manualslib.com manuals search engine
chargers, cables and plugs increase the risk of an electric
shock.
 Do not operate the battery charger on easily inflamma-
ble surfaces (e. g., paper, textiles, etc.) or surround-
ings. The heating of the battery charger during the charg-
ing process can pose a fire hazard.
Products sold in GB only: Your product is fitted with a
BS 1363/A approved electric plug with internal fuse (ASTA
approved to BS 1362).
If the plug is not suitable for your socket outlets, it should be
cut off and an appropriate plug fitted in its place by an author-
ised customer service agent. The replacement plug should
have the same fuse rating as the original plug.
The severed plug must be disposed of to avoid a possible
shock hazard and should never be inserted into a mains sock-
et elsewhere.
Product Description and Specifica-
tions
Intended Use
The machine is intended for hammer drilling in concrete,
brick and stone. It is also suitable for drilling without impact in
wood, metal, ceramic and plastic. Machines with electronic
control and right/left rotation are also suitable for screwdriv-
ing.
Use the battery charger only when you fully understand and
can perform all functions without limitation, or have received
appropriate instructions.
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 SDS-Quick tool holder
2 Dust protection cap
3 Locking sleeve
4 Selector switch for drilling/hammer drilling
5 Battery charge-control indicator
6 Indicator for right rotation
7 Indicator for left rotation
8 Rotational direction switch
9 On/Off switch
10 Universal bit holder*
11 Screwdriver bit*
12 Screwdriver bit with ball catch*
13 Drill bit with hexagon shank*
14 Drill bit with SDS-Quick tool holder*
15 Handle (insulated gripping surface)
16 Socket for charge connector
English | 13
Read all safety warnings and
all instructions. Failure to fol-
low the warnings and instruc-
tions may result in electric
shock, fire and/or serious inju-
ry.
1 609 92A 1FV | (3.8.15)