_mf-kuehlschraenke.book Seite 17 Montag, 16. Januar 2012 10:13 10
MF-05, MF-15
5.1
Connection sockets and control panel (rear of the device):
2, page 3
6
6.1
Choose a well ventilated installation location which is protected against
Allow food to cool down first before placing it in the device.
Do not open the cooling device more often than necessary.
Do not leave the door open for longer than necessary.
6.2
➤ Place the refrigerator on a firm base.
➤ Plug the 12 V connection cable (1 2, page 3) into the DC socket and also
or
➤ Plug the 220-240 V connection cable (1 3, page 3) into the AC voltage
Downloaded from
www.Manualslib.com
Description of the device
No. in
Description
1
AC voltage socket
2
DC voltage socket
3
Mode switch
4
"HOT" LED (red): indicates heating mode
5
"COLD" LED (green): indicates cooling mode
Operation
Before starting your new cooling device for the first time, you
should clean it inside and outside with a damp cloth for hygienic
reasons (please also refer to the the "Cleaning and maintenance"
chapter on page 18).
Energy saving tips
direct sunlight.
Using the cooling device
Like every cooling device, your cooler must be properly ventilated
so that any heat created can be drawn off. Otherwise proper func-
tioning cannot be ensured.
Ensure that the ventilation slots are at least 10 cm away from the wall so
that the heat that arises during operation can be drawn off.
into the cigarette lighter or a 12 V socket ...
socket and connect it to the 220-240 V AC mains supply.
manuals search engine
Operation
17