Using The Cooler - Dometic WAECO CoolFun CD 28 Bedienungsanleitung

Operation
6.2
A
I
Connecting cable plugl
DC
Place the device on a firm base.
Connect the corresponding cable (see figure) to the required voltage.
Push the ECO switch (fig. 2 4, page 3) to the required position.
Push the switch (fig. 2 3, page 3) on the control panel to the " " position
(cooling) or the " " position (heating) to switch the device on.
The device starts cooling/heating the interior.
The indicators on the control panel show you the operating mode:
Operating display
Green (fig. 2 1, page 3)
Red (fig. 2 2, page 3)
22
Downloaded from www.Manualslib.com

Using the cooler

NOTICE! Risk of damage
Ensure that the objects placed in the cooler are suitable for cool-
ing to the selected temperature.
The lid of the device must always be secured with the lock when
loading and unloading (fig. 3, page 4). If the lid is fully open
with-out being secured, the device could tip over.
Ensure that food or liquids in glass containers are not
excessively refrigerated. Liquids expand when they freeze
and can therefore destroy the glass containers.
Ensure that your cooler is well ventilated so that any heat
created can dissipate. Otherwise proper functioning cannot be
ensured. It is especially important not to cover the air vents.
NOTE
If the handle is folded back of if the cooler is being carried, the lid
is locked. You can only open the lid when the handle is folded for-
wards.
AC
manuals search engine
Operating mode
Cooling
Heating
CoolFun CD28