Auto Mode Operation; Temperature Adjustment During Auto; Fan Speed - Mitsubishi Heavy Industries SRF25ZIX-S Anwenderhandbuch

AUTO mode operation

■ Automatically selects the operation mode (COOL, HEAT, DRY) depending on the room temperature when switched on.
Display in OFF status

Temperature adjustment during AUTO

■ Air temperature adjustment is possible even during automatic operation. There are 6 levels of adjustment possible with the

FAN SPEED

■ You can choose the capacity of your air-conditioner
when heating mode, cooling mode or fan mode.
Operation capacity by your choice
Set automatically by microcomputer
Powerful operation with high capacity
Standard operation
Energy-saving operation
Downloaded from www.Manualslib.com
NOTE
• In case air is not blowing out during
the operation.
• When the included clean filter is in-
stalled the air conditioner will clean
the air during automatic operation.
• The current time and preset OPERA-
TION MODE are displayed while the
air conditioner is turned off.
FAN SPEED
manuals search engine
When the unit is not in AUTO mode:
1
Press MODE button.
Move the [ mark] to the
Point the remote control toward the air-conditioner, and
2
Press the ON/OFF button.
To stop:
AUTO mode can be
operated by simply
Page 21
pressing the ON/OFF
button.
• If you do not want the AUTO mode program, change to
COOL, HEAT, DRY or FAN instead of AUTO.
• Airflow direction adjustment procedure.
When a change in temperature is required.
1
Press the or
When it is a little cold
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
–6 → –5 → ............ –1 → ±0 → +1 ............ +6.
When +6 is indicated, even if the
When it is a little hot
Press the button.
■ Each time the
button is pressed, the switch over occurs in the following order
+6 → +5 → ............ +1 → ±0 → –1 ............ –6.
When –6 is indicated, even if the
Setting
-6 -5 -4 -3
temp.(°C)
20 21 22 23
Press the FAN SPEED button.
Move the [ mark] to the preferred fan speed position.
AUTO HI
AUTO
HI
NOTE
MED
LO
• When changing FAN SPEED from HI to LO, the sound of
refrigerant flowing may be heard.
– 8 –
(Auto) position.
Press the ON/OFF button.
Page 9
Page 10
button or the
button.
button is pressed, the indicator does not change.
button is pressed, the indicator does not change.
Remote Control display
+ 0
-2 -1 +1 +2 +3 +4
24 25 26 27 28 29 30
MED LO
button.
+5 +6
31 32