Auto Tuning; Manual Tuning; Recalling Preset Stations - Denon DRA-295 Bedienungsanleitung

ENGLISH

Auto tuning

1 2 3 4
B

Manual tuning

1
Set the input function to "TUNER".
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
NOTE:
• When the manual tuning mode is set, FM stereo broadcasts are received in monaural and the "STEREO" indicator
turns off.
10
Downloaded from www.Manualslib.com
1
Set the input function to "TUNER".
TUNER
(Main unit)
2
Watching the display, press the BAND button to
select the desired band (AM or FM).
BAND
(Main unit)
3
Press the MODE button to set the auto tuning
mode.
Lit
(Main unit)
4
Press the TUNING UP or DOWN button.
(Main unit)
• Automatic searching begins, then stops when
a station is tuned in.
NOTE:
• When in the auto tuning mode on the FM band, the
"STEREO" indicator lights on the display when a
stereo broadcast is tuned in. At open frequencies,
the noise is muted and the "TUNED" and "STEREO"
indicators turn off.
3
Press the MODE button to set the manual tuning
mode.
Check that the display's "AUTO" indicator turns
off.
4
Press the TUNING UP or DOWN button to tune
in the desired station.
The frequency changes continuously when the
button is held in.
manuals search engine
Preset stations
2 3 1, 4
B
TUNER CD CDR DVD / VDP
SHIFT TAPE AUX
2
• •
DIMMER A
3
PRESET STATUS SPEAKER MASTER VOL
ª B ª
MUTING
B
REMOTE CONTROL UNIT RC-907

Recalling preset stations

1 2
B
TUNER CD CDR DVD / VDP
SHIFT TAPE AUX
1
• •
DIMMER A
2
PRESET STATUS SPEAKER MASTER VOL
ª B ª
MUTING
B
REMOTE CONTROL UNIT RC-907
Preparations:
Use the "Auto tuning" or "Manual tuning" operation
to tune in the station to be preset in the memory.
1
Press the MEMORY button.
MEMORY
(Main unit)
2
Press the SHIFT button and select the desired
memory block (A to E).
SHIFT SHIFT
(Main unit) (Remote control unit)
NOTE: Please make sure the "AUDIO" position
of the slide switch on the remote control
unit.
3
Press the PRESET UP or DOWN button to select
the desired preset channel (1 to 8).
•
PRESET
ª
(Main unit) (Remote control unit)
4
Press the MEMORY button again to store the
station in the preset memory.
MEMORY
(Main unit)
To preset other channels, repeat steps 1 to 4.
A total of 40 broadcast stations can be preset – 8
stations (channels 1 to 8) in each of blocks A to E.
1 Watching the display, press the SHIFT button to
select the preset memory block.
SHIFT SHIFT
(Main unit) (Remote control unit)
2
Watching the display, press the PRESET UP or
DOWN button to select the desired preset channel.
•
PRESET
ª
(Main unit) (Remote control unit)