Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
INSTALLATION
THE APPLIANCE HAS TO BE INSTALLED BY QUALIFIED PERSONNEL IN ACCORDANCE TO THE INSTRUCTIONS HERE BELOW:
Make sure that the power supply is adequate to the appliance's power rating and voltage.
Make sure that the socket is properly earthed.
USE OF THE GRINDER
-
insert coffee beans into the hopper (11)
-
switch the machine ON by switching the main switch (1)
-
place the filter holder on its support
-
push 1 portion button (6) or two portion button (7)
-
the quantity of grinded coffee can be in/decreased by adjusting the set-up screws (8) or (9)
-
to adjust grinding, press the locking pin (4), and turn the adjusting screw clockwise to bring the burrs closer for finer
grinding.
-
to increase the grinded coffee quantity it's possible to push on the continuous button (2)
WARNING
The coffee grinder is equipped with a safety device preventing the motor from overheating.
Should the safety device set in, wait for the system to cool down and make sure that overheating is not caused by external
sources.
Grinding grade adjustment is to be performed while burrs are running.
MAINTENANCE
Clean the hopper on a weekly basis;
The only parts to be replaced are burrs: check if they wore out and replace both at the same time as described here below.
INDEX
1
Main switch
2
Button for continuous grinding
3
Grinding adjustment gear
4
Grinding adjustment locking pin
5
Technical data
6
Button for 1 portion
7
Button for 2 portions
8
Adjusting screw for 1 portion
9
Adjusting screw for 2 portions
10
Filterholder support
11
Hopper
12
Ground coffee spout
8
Werbung
Inhaltsverzeichnis
Fehlerbehebung
