First Installation - 969.Coffee ELBA Mini Solo Bedienungsanleitung

CONTENTS
p. 11 Introduction
IMPORTANT
p. 11 First installation
p. 12 General instructions
p. 12 Important safety precautions
p. 12 Installation – Water tank
p. 12 Coffee Preparation
p. 12 Cleaning
p. 13 Boiler Draining
p. 13 Orange light – Triple protection function
p. 14 Diagram: Coffee machine & controls
p. 15 Troubleshooting
p. 16 Box contains and options
INTRODUCTION
Please read this instruction manual carefully before using the espresso machine. It will advise how to get
the best out of your machine, correct maintenance, and troubleshooting.
IMPORTANTE:

FIRST INSTALLATION

1. Remove cup warmer lid (4). Lift the stainless steel water tank (10) some cm and slide
it from one side away.
2. Fill it up, if possible with filtered water.
3. Put the water tank in its position.
4. Shut ON the machine lifting the main switch (5) up. Green light and PID remains shut
off.
5. Lift the group lever (8) in upper position and wait until approx. ½ liter water is flown
from the group (7) (boiler full) then push lever down.
6. Switch the main (5) down to the second ON position in order to give power to the
heating element and warm up the water inside. postare l'interruttore generale (5) verso
il basso in posizione ON. Green light (1) and PID (3) are now lighting.
7. Push the left button of the PID until you see "PRG" on the display and after pushing
first the right and after the left or right button, set the desired temperature of the
water. Wait until the temperature is reached.
11