Troubleshooting; Instructions On Disposal - 969.Coffee 50 On Demand Bedienungsanleitung

WARNING:
- Before performing any maintenance operations, make sure that the coffee grinder is unplugged.
- Always replace both burrs.
BURRS REPLACEMENT:
- Set in the hopper closure;
- Activate the grinder until no more powder will be dispensed;
- Turn off and unplug the grinder;
- Remove the hopper by unscrewing it;
- Press down the locking rod with one hand and with the other unscrew the burrs housing gear by turning it anti-
clockwise.
- Unscrew the 3 burrs locking screws then remove the burrs; make sure to remove any traces of coffee powder from the
burrs housing;
- Place and lock a new set of burrs in the housing;
- Screw the adjustment gear on the grinder's body until the burrs touch;
- Unscrew the adjustment gear by 5 to 10 stops;
- Insert and lock the beans hopper;
- Plug in the grinder and turn it on;
- Open the hopper closure and set up the grinding grade while the grinder is running.
TROUBLE SHOOTING
PROBLEM
The coffee grinder does
not turn on
The motor does not run
Coffee powder mixed in
with larger fragments.

INSTRUCTIONS ON DISPOSAL

This product complies with EU Directive 2002/96/ EC.
The symbol on the product or on its packaging indicates that this product may not be treated as household waste.
Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. By
ensuring this product is disposed of correctly, you will help prevent potential negative consequences for the environment and
human health, which could otherwise be caused by inappropriate waste handling of this product. For more detailed
information about recycling of this product, please contact your local city office, your household waste disposal service or the
shop where you purchased the product.
CAUSE
1. Plug is not in the socket
2. Electronic control unit faulty
1. Foreign body between the burrs.
2. Overheating
3. Broken capacitor
1. Worn grinders
2. Grinders out of burrs
SOLUTION
1. Check that the plug is inserted in the
power socket. Inspect the cable of
the electronic control unit.
2. Contact the technical
service.
1. Unplug the coffee grinder and turn
the adjusting screw to remove the
foreign body.
2. Wait for the grinder to cool down.
3. Contact the technical
service.
1. Replace the burrs
assistance
assistance
9